Hi i've just found this forum and was wondering if there's anything i can do to resurrect my uk note 7 on 02 as i has the 0% battery firmware installed
thanks in advance for any help
uk note 7 o% battery firmware fix
Moderators: Junior Moderator, Jr. Admin
- beowulf381
- Administrator
- Posts: 579
- Joined: Mon Dec 12, 2016 10:57 am
Since you are in the UK and assuming you've an Exynos based SM-N930F or FD model you can do this by installation a custom recovery / root / custom rom like in the link below.dave.allen wrote: Wed Apr 19, 2017 12:29 am Hi i've just found this forum and was wondering if there's anything i can do to resurrect my uk note 7 on 02 as i has the 0% battery firmware installed
thanks in advance for any help
Before you start, make sure you enabled developer options, and inside developer options usb debugging and OEM unlock must be enabled too.
https://forum.xda-developers.com/note-7 ... 0-t3447611
- dave.allen
- Alliance Member
- Posts: 7
- Joined: Tue Apr 18, 2017 11:49 pm
My note 7 is at 0% and won't power on, is there any way to still do this
- dave.allen
- Alliance Member
- Posts: 7
- Joined: Tue Apr 18, 2017 11:49 pm
Even when plugged into the charger it won't power on properly it just displays a battery icon on the screen
- beowulf381
- Administrator
- Posts: 579
- Joined: Mon Dec 12, 2016 10:57 am
Can you bring it to download mode (press Vol Down + Home + Power together), while plugged in?dave.allen wrote: Wed Apr 19, 2017 5:39 pm Even when plugged into the charger it won't power on properly it just displays a battery icon on the screen
- dave.allen
- Alliance Member
- Posts: 7
- Joined: Tue Apr 18, 2017 11:49 pm
it just reboots to the same battery iconbeowulf381 wrote: Wed Apr 19, 2017 5:44 pmCan you bring it do download mode (press Vol Down + Home + Power together), while plugged in?dave.allen wrote: Wed Apr 19, 2017 5:39 pm Even when plugged into the charger it won't power on properly it just displays a battery icon on the screen
- beowulf381
- Administrator
- Posts: 579
- Joined: Mon Dec 12, 2016 10:57 am
You could try to leave it at the charger (use quick charger) sometime, ot try to come to recovery mode (Vol UP + Home + Power together).dave.allen wrote: Wed Apr 19, 2017 5:47 pmit just reboots to the same battery iconbeowulf381 wrote: Wed Apr 19, 2017 5:44 pmCan you bring it do download mode (press Vol Down + Home + Power together), while plugged in?dave.allen wrote: Wed Apr 19, 2017 5:39 pm Even when plugged into the charger it won't power on properly it just displays a battery icon on the screen
If nothing works, you're almost lost.
However, there is a solution, but you have to be tech savvy and willing to take a risk.
You can open the device, as you'd like to change the battery (there are several videos to do this, e.g. with youtube), then disconnect the battery from the charging logic board, and connnect it directly to the USB-C. But take care, this way it's possible to overcharge the battery and let it burn (that's the risk). So you have to monitor the charging level from time to time. Some guy here in forum already did this and it worked for him.
After you charged battery to sufficient level this way, all options with custom stuff like described are open again, and custom kernel will bring full charging ability (the normal way) back.
- dave.allen
- Alliance Member
- Posts: 7
- Joined: Tue Apr 18, 2017 11:49 pm
tried recovery mode and no luck, i might have to open it up, i'm into rc so i have a charger that will charge almost any battery so i could try that
- dave.allen
- Alliance Member
- Posts: 7
- Joined: Tue Apr 18, 2017 11:49 pm
ive managed to teardown the phone and remove the battery without damaging anything, but im not getting any voltage readings from it with a multimeter, ive had a look through the forums for the guy that did it previously and cant find anything has anyone got a link to it as all i need it for the pinouts for the battery to know the polarity
- beowulf381
- Administrator
- Posts: 579
- Joined: Mon Dec 12, 2016 10:57 am
Read this post here by kc.mullins:dave.allen wrote: Thu Apr 20, 2017 8:13 am ive managed to teardown the phone and remove the battery without damaging anything, but im not getting any voltage readings from it with a multimeter, ive had a look through the forums for the guy that did it previously and cant find anything has anyone got a link to it as all i need it for the pinouts for the battery to know the polarity
https://note7alliance.com/viewtopic.php?p=10815#p10815
Maybe you can contact him directly.
- dave.allen
- Alliance Member
- Posts: 7
- Joined: Tue Apr 18, 2017 11:49 pm
managed to figure it out, now charged the battery and it's booting up ok
