Switching from Current Disabler to Alliance Shield

Ask our community anything. We will do our best to help. You will receive an answer quicker via our discord support server.

Moderators: Junior Moderator, Jr. Admin

Locked
User avatar
burso772
Alliance Member
Posts: 7
Joined: Mon Jan 02, 2017 1:03 pm

Alliance, here is the deal and the steps I took to change to alliance shield from my current package disabler:

I was running a Note7 Verizon Gen 2 with EZ Disabler V2.4. Everything was working, I just didnt like how the play store wanted me to keep updating the app.. if I did, I would have been screwed, so I wanted to secure myself with an app I can trust - the Alliance Shield.

I just finished doing the change and so far so good. However, I had one hiccup... When installing the shield with EZ installed, the shield would not activate. It would let me grant admin rights, but then would never get to the main package screen to enable the protection. So I was stuck for a little. I realized in Miguelina Betty's video there was a policy notice from Knox that I never had to check so I went into EZ disabler and enabled everything Knox related, then uninstalled the alliance app, then reinstalled and started from scratch. This now allowed me into the main screen to enable the protection, however I still didnt receive that privacy notice checkbox. I then went to EZ disabler from inside my app tray and dragged it to disable.. It wouldnt let me right away because it was granted admin rights early on. I disabled admin rights, then dragged it again to disable. It then disabled. I went back to Alliance Shield, clicked "remove shield" at the bottom, then clicked the shield to re-enable the protection.

Everything seems to be working fine, but will update you if anything changes...
Top
User avatar
Groffice
Alliance Member
Posts: 5
Joined: Mon Dec 19, 2016 11:28 am

I currently am using S package disabler, do I need to uninstall before the shield?

Thanks,
Top
User avatar
Paddy935
Alliance Member
Posts: 5
Joined: Sat Nov 26, 2016 8:25 am

Got the same question @Groffice. Using BK Disabler at the Moment (sm 930F)
Top
User avatar
EGY
Alliance Member
Posts: 8
Joined: Sat Nov 26, 2016 1:27 am

burso772 wrote:Alliance, here is the deal and the steps I took to change to alliance shield from my current package disabler:

I was running a Note7 Verizon Gen 2 with EZ Disabler V2.4. Everything was working, I just didnt like how the play store wanted me to keep updating the app.. if I did, I would have been screwed, so I wanted to secure myself with an app I can trust - the Alliance Shield.

I just finished doing the change and so far so good. However, I had one hiccup... When installing the shield with EZ installed, the shield would not activate. It would let me grant admin rights, but then would never get to the main package screen to enable the protection. So I was stuck for a little. I realized in Miguelina Betty's video there was a policy notice from Knox that I never had to check so I went into EZ disabler and enabled everything Knox related, then uninstalled the alliance app, then reinstalled and started from scratch. This now allowed me into the main screen to enable the protection, however I still didnt receive that privacy notice checkbox. I then went to EZ disabler from inside my app tray and dragged it to disable.. It wouldnt let me right away because it was granted admin rights early on. I disabled admin rights, then dragged it again to disable. It then disabled. I went back to Alliance Shield, clicked "remove shield" at the bottom, then clicked the shield to re-enable the protection.

Everything seems to be working fine, but will update you if anything changes...
It seems so complicated! I can't find where the YouTube tutorial iz.. sumbudy heellpp

Sent from my SM-N930V using Tapatalk
Top
User avatar
NCqTee
Alliance Member
Posts: 328
Joined: Mon Nov 28, 2016 8:26 pm

Which tutorial do you need?
Top
User avatar
novares
Admin
Posts: 697
Joined: Tue Nov 22, 2016 10:46 pm

Video Tutorial:

Last edited by novares on Mon Jan 02, 2017 9:14 pm, edited 2 times in total.
Top
User avatar
Mdettloff
Alliance Member
Posts: 6
Joined: Fri Dec 30, 2016 6:52 pm

I already did spackage disabler, can I just run it without changing anything?
Top
User avatar
will.alexander
Alliance Member
Posts: 5
Joined: Fri Dec 09, 2016 10:46 am

Is there a guide to reversing the ADB update blocker so we can install shield?
Top
User avatar
gsimon
Alliance Member
Posts: 7
Joined: Tue Dec 20, 2016 12:04 pm

First, i would only have a package disabler if i downloaded, correct? in other words, it doesn't come pre-load on note 7.
Second,
i performed the OTA blocker with "Solid Explorer", should i just dis regard this and install the Alliance Shield?
Top
User avatar
anthony.means
Alliance Member
Posts: 3
Joined: Sat Dec 10, 2016 6:33 pm

I have bk disabler can i use that with the shield or one only?
Top
User avatar
Shellie03
Alliance Member
Posts: 7
Joined: Sat Dec 10, 2016 9:04 pm

I have been using package disabler pro since before they pushed the update to remove packages needed to block the OTA update. I also installed solid explorer and using it to block OTA update. I too am curious as to the steps needed to install Alliance Shield. :?:
Top
User avatar
Ledgejeff
Alliance Member
Posts: 23
Joined: Tue Dec 27, 2016 12:59 am

Mdettloff wrote:3098 I already did spackage disabler, can I just run it without changing anything?

I have s package running too. Did you do the alliance shield?
Top
Locked

Return to “Android”