Firmware update
Moderators: Junior Moderator, Jr. Admin
- Kourtneyelyse
- Alliance Member
- Posts: 24
- Joined: Tue Jan 03, 2017 9:11 pm
I am in download mode but Odin continues to fail. Continues to add remove add remove, but fails...what do I do? Smn930p
- DjRonG
- Alliance Member
- Posts: 27
- Joined: Thu Jan 05, 2017 1:40 pm
I am receiving this message in Odin3 v3.12 when I attempt to add the AP file "Md5 error! Binary is invalid" Does any one know where I can find the firmware to roll back my note 7 on sprint, SM-N930P. Please help want to get my phone back to 100%. When I did get it to work I recieved this message in Odin "All threads completed. (succeed 0 / failed 0)"
Last edited by DjRonG on Thu Jan 05, 2017 11:16 pm, edited 1 time in total.
- DjRonG
- Alliance Member
- Posts: 27
- Joined: Thu Jan 05, 2017 1:40 pm
Additional error info- <ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> emmc_appsboot.mbn
<ID:0/003> lksecapp.mbn
<ID:0/003> xbl.elf
<ID:0/003> tz.mbn
<ID:0/003> hyp.mbn
<ID:0/003> devcfg.mbn
<ID:0/003> pmic.elf
<ID:0/003> rpm.mbn
<ID:0/003> cmnlib.mbn
<ID:0/003> keymaster.mbn
<ID:0/003> apdp.mbn
<ID:0/003> msadp.mbn
<ID:0/003> cmnlib64.mbn
<ID:0/003> sec.dat
<ID:0/003> NON-HLOS.bin
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> emmc_appsboot.mbn
<ID:0/003> lksecapp.mbn
<ID:0/003> xbl.elf
<ID:0/003> tz.mbn
<ID:0/003> hyp.mbn
<ID:0/003> devcfg.mbn
<ID:0/003> pmic.elf
<ID:0/003> rpm.mbn
<ID:0/003> cmnlib.mbn
<ID:0/003> keymaster.mbn
<ID:0/003> apdp.mbn
<ID:0/003> msadp.mbn
<ID:0/003> cmnlib64.mbn
<ID:0/003> sec.dat
<ID:0/003> NON-HLOS.bin
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
- nfamouzprincezz
- Senior Moderator
- Posts: 251
- Joined: Tue Nov 22, 2016 11:22 pm
what carrier? did you have the 0% update
- julian.laurent
- Alliance Member
- Posts: 14
- Joined: Fri Jan 06, 2017 11:54 am
I have seen alot of people saying they can not get odin to work installing old firmware. I was hoping to go back to 100% batt but it seems like its becoming harder to do lately. If someone gets it to work correctly pleas post
- nfamouzprincezz
- Senior Moderator
- Posts: 251
- Joined: Tue Nov 22, 2016 11:22 pm
Where did you get the firmware? Did you use our links?DjRonG wrote:What drivers are you referring to?
